How to Invest in a New Kitchen area Faucet


Acquiring the correct kitchen faucet is dependent mainly on the existing plumbing. Choosing a new kitchen faucet can be less complicated than you imagine as soon as you think about three essential information just before you start out browsing.


Even though you are procuring for taps, shop for instruments, too—the approach of changing out a faucet is worlds less complicated when you have the proper tools. Most household offer stores where you may possibly store for taps will have what you need to have.

Start off With the Sink’s Faucet Holes

There are quite a few distinctive kitchen faucet and sink patterns accessible, but they are not generally compatible. Begin by taking a look at your kitchen sink to decide how quite a few pre-drilled faucet mounting holes are accessible. This applies if you happen to be installing a new faucet in an current sink or buying a totally new faucet and sink.

If your current faucet has a mounting plate on it, verify less than the sink to see how quite a few holes the mounting plate handles. Retain in intellect the pursuing about mounting holes:

  • Kitchen area faucets can have from 1 to four mounting holes.
  • Three holes are utilised for the spout and two handles.
  • A fourth gap is generally made use of for an accessory, such as a cleaning soap dispenser or facet sprays.
  • Just about every new faucet suggests on the packaging how a lot of mounting holes it demands for installation.
  • If you’re setting up a single-take care of faucet into a sink with three holes, the deck plate will ordinarily deal with up the unused openings.

The spot of the sink mounting holes is an additional detail to keep in brain. Typically, the faucet is located near to the heart of the sink, but this is not normally the circumstance. If the faucet will be mounted on a single side of the sink, the spout wants to be extended plenty of to access the opposite basin for it to be of use. A tall spout with a pull-down spray nozzle is a different option for a sink with corner mounting holes.


There are top rated-mount and base-mount faucets. Prime-mount taps attach from beneath the counter. The screws are screwed in by means of the bottom of the faucet. Bottom-mount taps connect from the top of the counter. The screws are set up via the best of the faucet piece.

Check out the H2o Lines

Make confident the new kitchen faucet you want is appropriate with the water provide lines. Search under your sink toward the base of the cabinet and observe the measurement of the current drinking water line and the shutoff valves. Below are a several suggestions to use when checking your water traces and valve:

  • If you happen to be unsure what dimensions your drinking water lines are, measure them with a measuring tape.
  • Even though you may have to hunt for it, the size ought to be etched on to the valve.
  • Take note that an more mature home may not have a shutoff valve.
  • A lot of more recent faucets appear with 3/8-inch flex traces hooked up. If the current h2o shutoff valves are 1/2-inch in sizing, you can expect to have to have to modify out the shut-off valves to 3/8-inch valves in advance of putting in the new faucet.
  • It is normally a good idea to substitute the shut-off valves when setting up a new faucet, anyhow, since an old valve could fall short if you want to shut off the water for leaks or other repairs.


If the sink mounting holes for your faucet are located nearer to a single side of the sink, make guaranteed your spout is extensive adequate to swing and reach the reverse aspect of the basin, in particular if you have a double sink. A single remedy is to invest in a tall spout with a pull-down spray nozzle. This design is ideal for a sink design with corner mounting holes.

Take into account the Complete

Even a little something as seemingly compact as the complete of a plumbing fixture can make or crack the aesthetics of your kitchen area. There are a couple guidelines of thumb. The kitchen faucet ought to match the finish of other sink equipment, these types of as the little dishwasher air hole, built-in cleaning soap dispenser, and sink-gap addresses for unused holes. A faucet that has a shiny chrome complete will glance out of location if the relaxation of the fixtures have a matte brushed nickel end, for illustration.


Dwelling IN Design and style

M-Style is a company with 10 years of experience in furniture business, our staff members are out there to execute any unique job, in accordance to the client’s desires, so that you really feel cozy in the property you have dreamed of.

Join the conversation

Request a call